A specific mast for boost your performance and enhance the experience of sliding.

Depending on the size of the mast, a rake is applied to boost your performance

Features

Depending on the size of the mast, a rake is applied to boost your performance. On the 78 cm, a negative rake of 1° is applied. This rake allows you to raise the nose of the board slightly. This brings a stronger support on the front foot in flight and therefore more dynamism (downwind program, surf foil). The 85 cm mast is neutral and therefore versatile for foiling. The 97 and 107 cm masts have a positive rake, allowing the center of gravity to be moved back for freerace and race programs.

4 mast sizes:

78 cm
85 cm
97 cm
107 cm

The Performer mast benefits from a variable rope. This last one is widened at the level of plate allowing to increase the rigidity and thus the support at takeoff. The submerged part of the mast has a lower chord which reduces drag and increases maneuverability.

The Performer masts are between 14 mm and 15 mm thick. This thin thickness increases your glide tenfold. For comparison, an aluminum mast with equivalent rigidity is about 19 mm for twice the weight.
This indeed a lively, slippery and playful foil.

Ultra - High modulus carbon

All the know-how of AFS: quality & performance. The Performer masts, made of high modulus pre-preg carbon in France, have been designed to transcend your foiling experience with a significant improvement in your glide and performance depending on your practice. The use of high modulus carbon allows to gain in rigidity (bending and torsion) while decreasing the thickness of the mast and thus the drag to optimize the glide.

Performer range

	Performer 78	Performer 85	Performer 97	Performer 107
Size	78 cm	85 cm	97 cm	107 cm
Construction	HM Carbon or UHM Carbon	HM Carbon or UHM Carbon	HM Carbon or UHM Carbon	HM Carbon or UHM Carbon
Rake	-1°	0°	1°	1°
Thickness	14 mm	14.5 mm	15 mm	15 mm
Practice	Downwind/Surf foil/Waves	Freeride Access/Freestyle/Race Approach/Waves	Race Approach	Race Approach

Mast/fuselage

The conical carbon monolithic fitting at the lower end of the mast allows a tight assembly with the fuselage without play. A set of three screws lock the whole thing together for maximum rigidity.

Lightweight and maintenance free

The full carbon construction brings stiffness and lightness to the foil. In the same way, you will not be bothered with marine aggressions such as corrosion that could weaken it.

A specific mast for boost your performance and enhance the experience of sliding.

Features

Rake

Height

Width

Thickener

Ultra - High modulus carbon

Performer range

Mast/fuselage

Lightweight and maintenance free

Subscribe to our newsletter

About us

Hello

Choose your county

NEWSLETTER

Caractéristiques techniques